Series CS
Features
Highest measurement
accuracy in its class. X axis: +/- (1+0.01L) um Z1 axis: +/- (1.5+|2H|/100) um
To detect surface
roughness and contour in a single measurement the Z1-axis detector unit of
CS-3200S4 has a wide measuring range and high resolution of 5mm / 0.08um to
0.05mm / 0.0008um.
In order to maintain
the traverse linearity specification for an extended period of time, Mitutoyo
has adopted highly rigid ceramic guides that combine the characteristics of
smallest secular change and remarkable resistance to abrasion.
Drastically increased
drive speed further reduces total measurement time. X axis: 80mm/s, Z2 axis:
20mm/s
To enhance safety
during fast traverse, the Z-axis detector unit incorporates a safety device
(Automatic Stop-On-Collision Mechanism).
The detector unit can
be extended to avoid interference between the drive unit and work piece. The
measuring range is shifted to the left by 2.76" (70mm).
Incorporation of an
ABS scale in the Z2 axis eliminates the need for origin point re-setting conventionally
required for every step of repeated measurements over step or multiple
sections.
Small holes and
inclined planes can be efficiently measured using the inclined X-axis drive
unit and fine-feed handles on the X and Z2 axes.
All detector and drive
unit cables are housed inside the main unit to eliminate any risk of abrasion
and guarantee trouble free, high-speed operation.
Orientation of the
drive unit can be inclined by +/- 45 degrees. This allows CS-3200 to measure an inclined
surface quickly.
*PC stand not included
|
Model
No. |
CS-3200S4 |
Order
No. |
525-411A |
X1-axis
measuring range |
4in(100mm) |
Z2-axis
vertical travel |
12in(300mm) |
Technical
Data |
Contour Measurement
X1-axis
Measuring range: 4"(100mm)
Resolution: 1.97uin(0.05um)
Measurement method: Reflective-type linear encoder
Drivespeed: 0-3.1"/s (0-80mm/s) and manual
Measuring speed: 0.00078-0.00787"/s
(0.02-0.2mm/s) (surface roughness)
0.00078-0.0787"/s (0.02-2mm/s)
(contour)
Measuring direction: (Push/Pull)
Traverse linearity: 8uin/4"(16uin/4")
[0.2um/100mm(0.4um/100mm)]
( ):at the protruded detector position
* with theX axis in horizontal orientation
Linear displacement accuracy (at20 degrees C):
+/- (32+10L)uin { +/- (0.8+0.01L)um}
* L =Drivelength(mm)
Inclination range: +/- 45 degrees Z2-axis (column)
Vertical travel: 12"(300mm)
Resolution: 39.4uin(1um)
Measurementmethod: ABSOLUTE linear encoder
Drivespeed: 0-0.78"/s (0-20mm/s)and manual
Z1-axis(detector unit)
Measuringrange/resolution: 3uin/.2",.3uin/.02", .03uin/.002"
(0.08um/5mm,0.008um/0.5mm,0.0008um/0.05mm)
Measurementmethod:Differentialinductance method
Lineardisplacement: +/- (60+20H)uin+/- (1.5+2H/100)um
Accuracy(at20 degrees C) *H: Measurement height from the horizontal position
(mm)
Stylus up/down operation:Arc movement Face of stylus: Downward
Measuringforce: 0.75mN
T raceableangle: Ascent:65 degrees,descent: 65 degrees
(using the standard stylus provided and depending on the surface roughness)
Stylus tip Radius:2um,diamond
Basesize (WxH): 23.6 x 17.7"(600x450mm)
Base material: Granite
Mass: 309lbs(140kg) (main unit)
Powersupply: 100 - 240VAC +/- 10%,50/60Hz
Power consumption: 400W (mainunit only) |
|
The Gauge Shop - "Your Source For Gauge Sales & Service"
407 Grove Street Loudon, Tennessee 37774